When to Change Engine Oil in Petrol Car

Introduction

Engine oil is the lifeblood of your car’s engine. It lubricates the moving parts, prevents wear and tear, and helps to keep the engine running smoothly. Over time, engine oil breaks down and becomes less effective at protecting your engine. That’s why it’s important to change your engine oil regularly.

How Often Should You Change Your Engine Oil?

The frequency with which you should change your engine oil depends on a number of factors, including the type of oil you use, the age of your car, and your driving habits. However, most experts recommend changing your engine oil every 5,000 to 7,500 miles.

If you use synthetic oil, you can usually go longer between oil changes. Synthetic oil is more resistant to breakdown than conventional oil, so it can last up to 10,000 miles or more.

If you drive in severe conditions, such as stop-and-go traffic or extreme temperatures, you may need to change your engine oil more often. Severe driving conditions can cause the oil to break down more quickly.

Signs That Your Engine Oil Needs to Be Changed

There are a few signs that can indicate that your engine oil needs to be changed. These signs include:

• Dark or dirty oil
• Low oil level
• Oil that smells burnt
• Engine noise or vibration
• Reduced fuel efficiency

How to Change Your Engine Oil

Changing your engine oil is a relatively simple task that can be completed in about an hour. You will need the following tools and materials:

• New engine oil
• New oil filter
• Oil drain pan
• Funnel
• Wrench

Once you have gathered your tools and materials, follow these steps to change your engine oil:

1. Park your car on a level surface and turn off the engine.
2. Allow the engine to cool for at least 30 minutes.
3. Place the oil drain pan under the oil pan.
4. Use the wrench to loosen the oil drain plug.
5. Allow the oil to drain into the oil drain pan.
6. Once the oil has drained, replace the oil drain plug and tighten it.
7. Locate the oil filter and use the wrench to loosen it.
8. Remove the old oil filter and replace it with the new oil filter.
9. Tighten the oil filter by hand, then use the wrench to tighten it an additional 3/4 turn.
10. Add the new engine oil to the engine. Use the funnel to avoid spilling oil.
11. Check the oil level on the dipstick. Add more oil if necessary.
12. Start the engine and let it run for a few minutes.
13. Check for leaks and make sure the oil level is correct.

Conclusion

Changing your engine oil is an important part of maintaining your car. By following the tips in this article, you can help keep your engine running smoothly for years to come.