How to Swap Engines in Car Mechanic Simulator 2021
1. Safety First
Before you start, make sure you have all the necessary safety gear, including gloves, safety glasses, and a mask. You’ll also need a few tools, including a wrench set, a socket set, and a torque wrench.
2. Locate the Engine
The engine is usually located in the front of the car, under the hood. It’s a large, metal block with a lot of wires and hoses connected to it.
3. Disconnect the Battery
The first step is to disconnect the battery. This will prevent any electrical fires from starting while you’re working on the engine. To disconnect the battery, simply use a wrench to loosen the negative terminal (the black one).
4. Remove the Hood
Once the battery is disconnected, you can remove the hood. To do this, simply locate the two bolts holding the hood in place and remove them.
5. Unbolt the Engine Mounts
The engine is mounted to the car’s frame using four or more bolts. To unbolt the engine mounts, simply use a wrench to loosen the bolts.
6. Lift the Engine
Once the engine mounts are unbolted, you can lift the engine out of the car. To do this, you’ll need an engine hoist. An engine hoist is a large, metal frame with a hydraulic pump that allows you to lift heavy objects.
7. Disconnect the Wiring and Hoses
Once the engine is lifted out of the car, you’ll need to disconnect all of the wiring and hoses that are connected to it. To do this, simply use a wrench to loosen the bolts or clamps that are holding the wires and hoses in place.
8. Remove the Engine
Once the engine mounts are unbolted, the wiring and hoses are disconnected, you can remove the engine from the car. To do this, simply lift the engine out of the car using the engine hoist.
9. Install the New Engine
To install the new engine, simply reverse the steps that you took to remove the old engine. First, lift the new engine into place using the engine hoist. Then, bolt the engine mounts into place. Finally, connect the wiring and hoses to the new engine.
10. Start the Car
Once the new engine is installed, you can start the car. To do this, simply turn the key in the ignition. If the car starts and runs smoothly, then you’ve successfully swapped the engine.
Conclusion
Swapping an engine in Car Mechanic Simulator 2021 is a complex process, but it’s also a very rewarding one. By following the steps in this guide, you can safely and easily swap the engine in your car.
