How to Start the Engine of an Automatic Car

1. Get in the Car and Buckle Up

The first step is to get into the car and buckle up. This is important for safety reasons, in case the car starts moving unexpectedly.

2. Make Sure the Car Is in Park

Next, make sure the car is in park. This will prevent the car from moving when you start it. To put the car in park, move the gear shifter to the “P” position.

3. Put the Key in the Ignition

Now, put the key in the ignition and turn it to the “On” position. This will turn on the electrical system of the car, but it will not start the engine.

4. Press the Brake Pedal

Next, press the brake pedal. This will disengage the car’s parking brake and allow you to start the engine.

5. Turn the Key to the “Start” Position

Finally, turn the key to the “Start” position and hold it there until the engine starts. Once the engine starts, release the key.

Tips

* If the engine does not start, try turning the key to the “Start” position again and holding it there for a few seconds longer.
* If the engine still does not start, there may be a problem with the car’s battery or starter motor. You should have the car towed to a mechanic to have it checked out.
* If the car starts moving when you start the engine, it is likely that the car is not in park. Move the gear shifter to the “P” position and try starting the engine again.

Conclusion

Starting the engine of an automatic car is a simple process that can be done in a few easy steps. By following the tips in this article, you can be sure to start your car safely and without any problems.