How to Start a Car Engine Out of the Car

Safety First

Before you start working on your car, it’s important to take some safety precautions. Park your car on a level surface and engage the parking brake. Disconnect the negative terminal of the battery. This will help to prevent any electrical shocks or fires.

Materials You’ll Need

A remote starter
A pair of jumper cables
A wrench or socket set

Step-by-Step Instructions

Locate the starter solenoid. The starter solenoid is a small, cylindrical device that is located on the side of the starter motor. It is usually black or silver in color.
Connect the positive cable to the starter solenoid. The positive cable is the red cable on the jumper cables. Connect it to the positive terminal on the starter solenoid.
Connect the negative cable to a ground. The negative cable is the black cable on the jumper cables. Connect it to a metal surface on the car that is not painted or coated. A good place to connect the negative cable is the engine block.
Start the car. Once the jumper cables are connected, turn the key in the ignition to the “start” position. The car should start within a few seconds.
Disconnect the jumper cables. Once the car is started, disconnect the jumper cables in the reverse order that you connected them. First, disconnect the negative cable from the ground, and then disconnect the positive cable from the starter solenoid.

Troubleshooting

If you are unable to start the car, there are a few things that you can check.

Make sure that the jumper cables are connected properly. The positive cable should be connected to the positive terminal on the starter solenoid, and the negative cable should be connected to a ground.
Check the battery terminals. The battery terminals should be clean and free of corrosion. If the terminals are corroded, you can clean them with a wire brush.
Check the starter solenoid. The starter solenoid may be faulty. You can test the starter solenoid by using a multimeter to check for continuity. If the starter solenoid is faulty, you will need to replace it.

Conclusion

Starting a car engine out of the car can be a daunting task, but it is actually quite simple. By following the steps outlined in this guide, you can safely and easily start your car engine without having to call a tow truck.