## How to Remove Engine in Car Mechanic Simulator 2018
Step 1: Prepare the Car
1. Park the car on a level surface.
2. Disconnect the battery.
3. Remove the wheels.
4. Remove the front bumper.
5. Drain the oil and coolant.
Step 2: Remove the Accessory Belt
1. Locate the accessory belt tensioner.
2. Use a wrench to loosen the tensioner.
3. Remove the accessory belt.
Step 3: Remove the Intake System
1. Disconnect the intake hose.
2. Remove the bolts holding the intake manifold.
3. Lift the intake manifold off the engine.
Step 4: Disconnect the Wiring Harness
1. Locate the electrical connectors on the engine.
2. Disconnect the connectors by squeezing the tabs and pulling them apart.
Step 5: Disconnect the Hoses and Lines
1. Disconnect the fuel lines.
2. Disconnect the coolant hoses.
3. Disconnect the vacuum hoses.
Step 6: Remove the Exhaust System
1. Disconnect the exhaust manifold bolts.
2. Remove the exhaust manifold.
3. Disconnect the exhaust pipe.
Step 7: Remove the Transmission
1. Remove the bolts holding the transmission to the engine.
2. Use a transmission jack to lower the transmission.
3. Disconnect the drive shaft.
Step 8: Remove the Engine Mounts
1. Locate the engine mounts.
2. Remove the bolts holding the engine mounts.
3. Use a hoist to lift the engine out of the car.
## Troubleshooting
Engine Won’t Come Out
1. **Check for any bolts or nuts that may still be attached.**
2. **Ensure that all electrical connectors are disconnected.**
3. **Try using a pry bar or chisel to gently pry the engine out of place.**
Engine Is Stuck on the Mounts
1. **Try spraying the mounts with penetrating oil.**
2. **Use a hammer to tap the mounts until they loosen.**
3. **If the mounts are damaged, they may need to be replaced.**
Engine Is Too Heavy to Lift
1. **Use a hoist with a higher capacity.**
2. **Get assistance from another person to help lift the engine.**
3. **Break the engine into smaller pieces to make it easier to lift.**
## Conclusion
Removing an engine in Car Mechanic Simulator 2018 can be a challenging task, but it is possible with the right tools and knowledge. By following the steps outlined in this guide, you can safely and effectively remove the engine from your car.
