## How to Pull Out an LS Engine from a Car ##
The LS engine is a popular choice for performance enthusiasts, and for good reason. It’s a powerful and reliable engine that can be found in a variety of GM vehicles. If you’re looking to pull an LS engine from a car, here’s a step-by-step guide to help you get the job done. ## Tools You’ll Need ##
– Socket wrench set
– Ratchet wrench
– Screwdriver set
– Drain pan
– Oil filter wrench
– Jack
– Jack stands
– Engine hoist
– Chain or straps
– Safety glasses
– Gloves ## Safety First ##
Before you begin, it’s important to take some safety precautions. Make sure you’re wearing safety glasses and gloves, and that the car is parked on a level surface. Disconnect the battery negative terminal to prevent any electrical accidents. ## Step 1: Drain the Fluids ##
The first step is to drain the fluids from the engine. This includes the oil, coolant, and transmission fluid. Place a drain pan under the engine and remove the drain plug to drain the oil. Once the oil has drained, remove the radiator cap and drain the coolant into the drain pan. Finally, remove the transmission pan and drain the transmission fluid. ## Step 2: Remove the Accessories ##
Once the fluids have been drained, you can begin removing the accessories. This includes the alternator, power steering pump, air conditioning compressor, and anything else that is attached to the engine. Be sure to disconnect all of the electrical connectors and hoses before removing the accessories. ## Step 3: Disconnect the Wiring ##
Once the accessories have been removed, you can begin disconnecting the wiring. Start by disconnecting the battery negative terminal. Then, disconnect the main harness from the engine. Finally, disconnect any other electrical connectors that are attached to the engine. ## Step 4: Remove the Transmission ##
If the engine is still attached to the transmission, you will need to remove the transmission before you can pull the engine. To do this, place a jack under the transmission and raise it until it is level with the engine. Then, remove the nuts and bolts that hold the transmission to the engine. Once the transmission is disconnected, you can lower it to the ground. ## Step 5: Remove the Motor Mounts ##
The motor mounts are what hold the engine to the frame of the car. To remove the motor mounts, place a jack under the engine and raise it until it is level with the motor mounts. Then, remove the nuts and bolts that hold the motor mounts to the engine and the frame. Once the motor mounts are disconnected, you can lower the engine to the ground. ## Step 6: Pull the Engine Out ##
Now that the engine is disconnected, you can pull it out of the car. To do this, attach a chain or straps to the engine lifting points. Then, connect the chain or straps to an engine hoist. Slowly raise the engine until it is clear of the car. ## Step 7: Transport the Engine ##
Once the engine is out of the car, you can transport it to your desired location. Be sure to secure the engine in place so that it does not move around during transport. ## Conclusion ##
Pulling an LS engine from a car is a relatively straightforward process. By following the steps outlined in this guide, you can safely and easily remove the engine from your car. Just be sure to take your time and be careful, and you’ll be able to get the job done right.
