How to Open Engine Hood on Smart Car

Materials You’ll Need

• Owner’s manual (if available)
• Flathead screwdriver (optional)

Step-by-Step Instructions

1. Park the Smart Car on a Level Surface

This is important for safety and to prevent the car from rolling.

2. Locate the Hood Release Lever

It is typically located inside the car, on the driver’s side. Refer to your owner’s manual for the exact location.

3. Pull the Hood Release Lever

This will release the primary latch that holds the hood closed.

4. Go to the Front of the Car

Walk around to the front of the car to locate the secondary latch.

5. Locate the Secondary Latch

It is usually a small, black lever located in the center of the hood.

6. Press the Secondary Latch

Push down on the lever to release the secondary latch.

7. Lift the Hood

Carefully lift the hood up and secure it with the hood prop.

Additional Tips

• If you have difficulty locating the hood release lever or secondary latch, consult your owner’s manual for specific instructions.
• Be sure to engage the hood prop securely to prevent the hood from closing unexpectedly.
• Do not open the hood if the engine is hot, as you risk burns.

Conclusion

Opening the engine hood on a Smart Car is a simple task that can be performed in a few minutes. By following these instructions, you can safely access the engine compartment and perform maintenance or repairs.