## How to Make a Remote Control Car Engine
Introduction
Remote control cars are a popular hobby for people of all ages. They can be used for racing, bashing, or simply driving around for fun. If you’re interested in building your own remote control car, one of the most important parts is the engine. In this guide, we’ll show you how to make a simple remote control car engine using a few basic materials.
Materials
To make a remote control car engine, you will need the following materials:
* A small electric motor
* A battery
* A switch
* A few pieces of wire
* A small piece of cardboard
* A hot glue gun
Instructions
1. **Cut a small piece of cardboard.** The cardboard will serve as the base for your engine. It should be about 2 inches wide and 3 inches long.
2. **Glue the motor to the cardboard.** The motor should be placed in the center of the cardboard. Use hot glue to secure it in place.
3. **Connect the battery to the motor.** Use a few pieces of wire to connect the positive terminal of the battery to the positive terminal of the motor. Then, connect the negative terminal of the battery to the negative terminal of the motor.
4. **Add a switch to the circuit.** The switch will allow you to turn the engine on and off. Connect one wire from the battery to the switch. Then, connect another wire from the switch to the motor.
5. **Test the engine.** Once you have assembled the engine, you can test it by turning on the switch. The motor should start running.
Troubleshooting
If your engine is not working, there are a few things you can check:
* Make sure that the battery is connected correctly.
* Make sure that the switch is turned on.
* Check the connections between the battery, motor, and switch.
* If the motor is still not running, it may be defective.
Conclusion
Making a remote control car engine is a simple and fun project. With a few basic materials, you can create a working engine that will power your remote control car.
