## How to Get Engine Codes to Come Back on Car
Introduction
Engine codes are a useful tool for diagnosing and repairing problems with your car. However, they can sometimes be difficult to get to come back on. This article will provide you with some tips on how to get engine codes to come back on your car.
Check the Engine Code Reader
The first thing you should do is check the engine code reader. Make sure that it is properly connected to the car’s diagnostic port. If the reader is not connected properly, it will not be able to read the engine codes.
Clear the Engine Codes
If the engine code reader is connected properly, you can try clearing the engine codes. This will reset the computer and may cause the engine codes to come back on. To clear the engine codes, you can use a code reader or you can disconnect the battery for a few minutes.
Drive the Car
If you have cleared the engine codes, you will need to drive the car for a while in order to get the engine codes to come back on. The engine codes will typically come back on after the car has been driven for a few miles.
Check the Engine Light
If you have driven the car for a while and the engine codes have not come back on, you can check the engine light. The engine light is typically located on the dashboard. If the engine light is on, it means that there is a problem with the car that needs to be addressed.
Get the Car Inspected
If you have tried all of the above steps and the engine codes have still not come back on, you may need to take the car to a mechanic to have it inspected. The mechanic will be able to use a code reader to read the engine codes and diagnose the problem.
Conclusion
Getting engine codes to come back on your car can be a frustrating process. However, by following the tips in this article, you can increase your chances of getting the codes to come back on. If you are unable to get the engine codes to come back on, you may need to take the car to a mechanic to have it inspected.
Additional Tips
Here are some additional tips that may help you get engine codes to come back on your car:
* **Use a high-quality code reader.** A high-quality code reader will be able to read more engine codes than a cheap code reader.
* **Make sure that the car is in park or neutral.** The car must be in park or neutral in order for the engine codes to be read.
* **Turn the key to the “on” position.** Do not start the car.
* **Connect the code reader to the car’s diagnostic port.** The diagnostic port is typically located under the dashboard.
* **Follow the instructions on the code reader.** The code reader will typically display a list of engine codes.
* **Write down the engine codes.** You will need the engine codes to diagnose the problem.
* **Clear the engine codes.** You can clear the engine codes using the code reader or by disconnecting the battery for a few minutes.
* **Drive the car for a while.** The engine codes will typically come back on after the car has been driven for a few miles.
* **Check the engine light.** If the engine light is on, it means that there is a problem with the car that needs to be addressed.
* **Get the car inspected.** If you are unable to get the engine codes to come back on, you may need to take the car to a mechanic to have it inspected.
