How to Fix the Phantom Cars Engine on Garry’s Mod

Introduction

The Phantom Car is a popular vehicle in Garry’s Mod, but it can be frustrating when the engine stops working. There are a few things that can cause this, but the most common is a problem with the spark plugs.

How to Fix the Problem

To fix the problem, you will need to:

1. Open the hood of the Phantom Car.
2. Locate the spark plugs. They are located on the top of the engine, and they are connected to the ignition coils.
3. Remove the spark plugs using a socket wrench.
4. Inspect the spark plugs. If they are worn or damaged, they will need to be replaced.
5. Install new spark plugs.
6. Close the hood of the Phantom Car.
7. Start the engine.

The Phantom Car should now be running properly.

Additional Tips

Here are a few additional tips that may help you fix the problem:

* If you are not sure how to remove or install spark plugs, consult a mechanic.
* Make sure that the new spark plugs are the correct type for your Phantom Car.
* If the problem persists, there may be another issue with the engine. You may need to take your Phantom Car to a mechanic to have it diagnosed.

Conclusion

Fixing the phantom cars engine on garry’s mod is a relatively simple process. By following the steps above, you should be able to get your Phantom Car running properly again in no time.