- How to Change the Car Engine Filter Auto Parts Store
- Materials You’ll Need
- Safety Precautions
- Step-by-Step Instructions
- 1. Locate the Engine Filter
- 2. Remove the Old Filter
- 3. Clean the Filter Housing
- 4. Lubricate the New Filter
- 5. Install the New Filter
- 6. Tighten the Filter
- 7. Check for Leaks
- 8. Reset the Oil Life Monitor
- Conclusion
How to Change the Car Engine Filter Auto Parts Store
Materials You’ll Need
- New engine filter
- Wrench
- Oil filter wrench (optional)
- Oil pan
- Rags
Safety Precautions
Before you begin, it’s important to take some safety precautions:
- Park your car on a level surface and engage the parking brake.
- Allow the engine to cool down before you start working.
- Wear gloves to protect your hands from hot oil.
- Dispose of the old oil filter properly.
Step-by-Step Instructions
Now that you have everything you need and have taken the necessary safety precautions, you can follow these step-by-step instructions to change the car engine filter:
1. Locate the Engine Filter
The engine filter is usually located near the top of the engine. It’s a cylindrical-shaped component with a black or gray housing.
2. Remove the Old Filter
Use a wrench to loosen the old filter. Be careful not to overtighten the wrench, as this could damage the filter housing.
Once the filter is loose, use your hands to unscrew it the rest of the way. Be careful not to spill any oil.
3. Clean the Filter Housing
Use a rag to clean the filter housing where the old filter was located. Remove any dirt or debris.
4. Lubricate the New Filter
Apply a thin layer of oil to the rubber gasket on the new filter. This will help to create a seal and prevent leaks.
5. Install the New Filter
Screw the new filter onto the filter housing by hand. Tighten it until it’s snug, but don’t overtighten.
6. Tighten the Filter
Use the wrench to tighten the filter an additional 3/4 turn. Do not overtighten.
7. Check for Leaks
Start the engine and let it run for a few minutes. Check for any leaks around the filter. If you see any leaks, tighten the filter further.
8. Reset the Oil Life Monitor
If your car has an oil life monitor, you’ll need to reset it after changing the oil filter. Consult your owner’s manual for instructions on how to do this.
Conclusion
Changing the car engine filter is a simple and inexpensive maintenance task that can help keep your engine running smoothly. By following these step-by-step instructions, you can change your car engine filter in no time.
