- How to Change Engine Oil in Santro Car
- Materials Needed
- Safety First
- Step-by-Step Instructions
- 1. Locate the Oil Drain Plug
- 2. Place the Oil Drain Pan
- 3. Remove the Oil Drain Plug
- 4. Drain the Oil
- 5. Replace the Oil Drain Plug
- 6. Locate the Oil Filter
- 7. Remove the Oil Filter
- 8. Apply a Thin Coat of New Oil to the Gasket of the New Oil Filter
- 9. Screw on the New Oil Filter
- 10. Add New Engine Oil
- 11. Check the Oil Level
- 12. Start the Engine and Check for Leaks
- 13. Reset the Oil Life Monitor
- Tips
- Conclusion
How to Change Engine Oil in Santro Car
Materials Needed
- New engine oil (check your owner’s manual for the recommended type and amount)
- New oil filter
- Oil drain pan
- Funnel
- Wrench
- Gloves
Safety First
Before you start, make sure the engine is cool. Park the car on a level surface and engage the parking brake.
Step-by-Step Instructions
1. Locate the Oil Drain Plug
The oil drain plug is typically located on the bottom of the oil pan. It is usually a 17mm bolt.
2. Place the Oil Drain Pan
Position the oil drain pan under the oil drain plug.
3. Remove the Oil Drain Plug
Use the wrench to carefully loosen the oil drain plug. Be careful not to drop the bolt into the oil drain pan.
4. Drain the Oil
Allow the oil to drain completely into the oil drain pan. This may take several minutes.
5. Replace the Oil Drain Plug
Once the oil has drained, replace the oil drain plug and tighten it securely.
6. Locate the Oil Filter
The oil filter is typically located near the top of the engine. It is usually a cylindrical-shaped component with a black cap.
7. Remove the Oil Filter
Use the wrench to carefully loosen the oil filter. Be careful not to spill any oil.
8. Apply a Thin Coat of New Oil to the Gasket of the New Oil Filter
This will help to create a seal and prevent leaks.
9. Screw on the New Oil Filter
Hand-tighten the new oil filter until it is snug. Do not overtighten.
10. Add New Engine Oil
Use the funnel to add new engine oil to the engine. Add the amount of oil specified in your owner’s manual.
11. Check the Oil Level
Use the dipstick to check the oil level. The oil level should be between the “min” and “max” marks on the dipstick.
12. Start the Engine and Check for Leaks
Start the engine and let it idle for a few minutes. Check for any leaks around the oil drain plug or oil filter.
13. Reset the Oil Life Monitor
If your car has an oil life monitor, reset it according to the instructions in your owner’s manual.
Tips
- Change your engine oil regularly according to your owner’s manual. This will help to keep your engine running smoothly and extend its life.
- Use the correct type of engine oil for your car. This information can be found in your owner’s manual.
- Dispose of used engine oil and oil filters properly. Do not pour them down the drain or into the trash.
- If you are not comfortable changing your engine oil yourself, you can take your car to a mechanic to have it done.
Conclusion
Changing your engine oil is a relatively simple task that can be done in about 30 minutes. By following these instructions, you can save money and keep your car running in top condition.
