How to Change Car Engine Mounting
Introduction
Engine mounts are responsible for keeping your engine in place and reducing vibrations. Over time, these mounts can wear out and need to be replaced. Replacing engine mounts is a relatively simple task that can be completed in a few hours with the right tools and materials.
Tools and Materials
- New engine mounts
- Socket wrench set
- Floor jack
- Jack stands
- Safety glasses
- Gloves
Safety First
Before you begin, it is important to take some safety precautions. Make sure to wear safety glasses and gloves to protect yourself from flying debris and chemicals. Also, be sure to park your car on a level surface and engage the parking brake to prevent it from rolling.
Step-by-Step Instructions
- Raise the vehicle. Use a floor jack to raise the front of the vehicle until there is enough space to work underneath. Be sure to place jack stands under the frame for safety.
- Remove the old engine mounts. Locate the engine mounts and remove the bolts that hold them in place. Be careful not to drop the engine when removing the mounts.
- Install the new engine mounts. Place the new engine mounts in place and tighten the bolts to the specified torque. Be sure to use a torque wrench to ensure that the bolts are tightened properly.
- Lower the vehicle. Slowly lower the vehicle until it is on the ground. Remove the jack stands and tighten the lug nuts on the wheels.
- Test drive the vehicle. Start the engine and listen for any unusual noises. Take the vehicle for a test drive to make sure that the engine is running smoothly and that there are no vibrations.
Tips
- If you are not comfortable replacing engine mounts yourself, you can take your vehicle to a mechanic to have them replaced.
- It is a good idea to replace all of the engine mounts at the same time, even if only one of them is showing signs of wear.
- Be sure to use the correct torque when tightening the bolts on the engine mounts. Overtightening the bolts can damage the engine.
- If you have any questions about replacing engine mounts, consult a qualified mechanic.
Conclusion
Replacing engine mounts is a relatively simple task that can be completed in a few hours with the right tools and materials. By following these step-by-step instructions, you can save yourself money and keep your engine running smoothly.
