How to Remove an Engine from a Car

Removing an engine from a car is a major undertaking, but it can be done with the right tools and knowledge. Here are the steps you need to follow:

1. Safety First

Before you start, make sure you have the following safety gear:

• Safety glasses
• Gloves
• Earplugs
• A fire extinguisher

2. Prepare the Car

Once you have the safety gear, you need to prepare the car for engine removal. Here are the steps:

1. Park the car on a flat, level surface.
2. Disconnect the negative terminal of the battery.
3. Drain the coolant and oil.
4. Remove the air cleaner and intake manifold.
5. Disconnect the exhaust system.

3. Remove the Engine Mounts

The engine mounts are the brackets that hold the engine in place. You need to remove them before you can lift the engine out.

1. Locate the engine mounts. They are usually located on the sides of the engine.
2. Use a wrench or socket to remove the bolts that hold the engine mounts in place.
3. Once the bolts are removed, you can lift the engine mounts off the engine.

4. Lift the Engine Out

Once the engine mounts are removed, you can lift the engine out of the car. You will need an engine hoist or a cherry picker to do this.

1. Attach the engine hoist or cherry picker to the engine.
2. Slowly lift the engine out of the car.
3. Once the engine is clear of the car, you can set it down on a workbench or dolly.

5. Clean the Engine Bay

Once the engine is out, you should clean the engine bay. This will make it easier to install the new engine.

• Use a degreaser to clean the engine bay.
• Rinse the engine bay with water.
• Dry the engine bay with a towel.

6. Install the New Engine

Once the engine bay is clean, you can install the new engine. Here are the steps:

1. Lift the new engine into the car.
2. Attach the engine mounts to the engine.
3. Connect the exhaust system.
4. Install the air cleaner and intake manifold.
5. Fill the engine with oil and coolant.
6. Connect the battery.

7. Start the Engine

Once the new engine is installed, you can start it up. Here are the steps:

1. Turn the key to the “on” position.
2. Wait for the fuel pump to prime.
3. Start the engine.

If the engine starts, you have successfully removed and installed an engine from a car.