Cars with 3800 Series 3 Engine
Introduction
The 3800 Series 3 engine is a V6 engine that was produced by General Motors from 1995 to 2008. It was a popular engine, and it was used in a variety of cars, including the Buick LeSabre, the Chevrolet Impala, and the Pontiac Grand Prix.
Design
The 3800 Series 3 engine is a 3.8-liter engine with a 90-degree cylinder bank angle. It has a cast-iron block and aluminum heads. The engine is equipped with two valves per cylinder, and it has a compression ratio of 9.5:1.
Performance
The 3800 Series 3 engine produces 200 horsepower at 5200 rpm and 225 lb-ft of torque at 4000 rpm. These are respectable figures for a naturally aspirated V6 engine. The engine is smooth and quiet, and it provides good acceleration.
Fuel Economy
The 3800 Series 3 engine is not particularly fuel-efficient. It gets an EPA-estimated 18 mpg in the city and 26 mpg on the highway. However, this is comparable to other V6 engines of the same era.
Reliability
The 3800 Series 3 engine is generally considered to be reliable. However, it is not without its problems. Some common problems include:
* Intake manifold gasket failure
* Oil leaks
* Head gasket failure
Applications
The 3800 Series 3 engine was used in a variety of cars, including:
* Buick LeSabre
* Buick Park Avenue
* Chevrolet Impala
* Chevrolet Lumina
* Oldsmobile Aurora
* Pontiac Bonneville
* Pontiac Grand Prix
Conclusion
The 3800 Series 3 engine is a solid V6 engine that provides good performance and reliability. It is not particularly fuel-efficient, but it is comparable to other V6 engines of the same era. If you are looking for a used car with a reliable engine, the 3800 Series 3 engine is a good option.
