Car Won’t Go into Gear When Engine Running Manual
If your car won’t go into gear when the engine is running, it can be a frustrating and dangerous situation. Here are some of the most common causes of this problem, as well as some tips on how to fix it.
Low Transmission Fluid
One of the most common causes of a car not going into gear is low transmission fluid. Transmission fluid is responsible for lubricating and cooling the transmission, and if it is low, the transmission can’t function properly. Check the transmission fluid level and add more if necessary.
Faulty Clutch
Another common cause of a car not going into gear is a faulty clutch. The clutch is responsible for connecting and disconnecting the engine from the transmission, and if it is not working properly, the car won’t be able to go into gear. Have the clutch inspected by a mechanic to see if it needs to be replaced.
Damaged Gearshift Linkage
The gearshift linkage is responsible for connecting the gearshift lever to the transmission. If the linkage is damaged, the car won’t be able to go into gear. Inspect the gearshift linkage for any damage and replace it if necessary.
Faulty Shift Fork
The shift fork is responsible for moving the gears into place. If the shift fork is damaged, the car won’t be able to go into gear. Have the shift fork inspected by a mechanic to see if it needs to be replaced.
Worn Out Synchros
Synchros are responsible for matching the speed of the gears when shifting. If the synchros are worn out, the car won’t be able to go into gear smoothly. Have the synchros inspected by a mechanic to see if they need to be replaced.
Tips for Fixing a Car That Won’t Go into Gear
If your car won’t go into gear, there are a few things you can do to try to fix the problem yourself. First, check the transmission fluid level and add more if necessary. If the fluid level is fine, then you can try bleeding the clutch. To bleed the clutch, pump the clutch pedal several times and then hold it down. Open the bleeder valve on the slave cylinder and let the fluid flow out until it is clear. Close the bleeder valve and pump the clutch pedal several more times.
If bleeding the clutch doesn’t solve the problem, then you may need to have the clutch or transmission inspected by a mechanic. A mechanic can diagnose the problem and recommend the best course of action.
Conclusion
If your car won’t go into gear, it can be a frustrating and dangerous situation. However, by following the tips in this article, you can try to diagnose the problem yourself and get your car back on the road.
