Car Mechanic Simulator 2021: Swap Any Engine

Introduction

Car Mechanic Simulator 2021 is a realistic car mechanic simulation game that allows you to build, repair, and tune cars. One of the most challenging and rewarding tasks in the game is swapping an engine. This guide will show you how to do it step-by-step.

Step 1: Gather Your Tools

Before you start, you’ll need to gather the following tools:

Engine hoist
Engine stand
Socket set
Wrench set
Screwdriver set
Pliers
Hammer
Chisel
Safety glasses
Gloves

Step 2: Prepare the Car

Once you have your tools, you need to prepare the car for the engine swap. This involves:

Disconnecting the battery
Draining the coolant
Removing the intake manifold
Removing the exhaust manifold
Removing the transmission
Removing the driveshaft

Step 3: Remove the Old Engine

Now you can remove the old engine. To do this, follow these steps:

Attach the engine hoist to the engine.
Lift the engine out of the car.
Place the engine on the engine stand.

Step 4: Install the New Engine

Now you can install the new engine. To do this, follow these steps:

Attach the engine hoist to the new engine.
Lift the new engine into the car.
Lower the new engine into place.
Bolt the new engine to the transmission.
Install the driveshaft.
Install the exhaust manifold.
Install the intake manifold.
Fill the coolant system.
Connect the battery.

Step 5: Test the New Engine

Once the new engine is installed, you need to test it to make sure it’s working properly. To do this, start the car and let it run for a few minutes. Then, check for any leaks or unusual noises. If everything looks good, you’re done!

Conclusion

Swapping an engine is a complex and challenging task, but it’s also very rewarding. By following the steps in this guide, you can successfully swap an engine in Car Mechanic Simulator 2021.

Additional Tips

Take your time and don’t rush.
Use the right tools for the job.
Be careful not to damage any of the components.
If you’re not sure how to do something, don’t be afraid to ask for help.

Troubleshooting

If you’re having trouble swapping an engine, here are some troubleshooting tips:

Make sure you have all of the necessary tools.
Check that the new engine is compatible with the car.
Follow the steps in this guide carefully.
If you’re still having trouble, you can consult the game’s forums or ask for help from the developers.