Where to pour engine oil in car




Where to Pour Engine Oil in Car

Where to Pour Engine Oil in Car

Materials You’ll Need

  • New engine oil
  • New oil filter
  • Oil filter wrench
  • Funnel
  • Clean rags
  • Gloves
  • Safety glasses

Safety Precautions

  • Park your car on a level surface and engage the parking brake.
  • Allow the engine to cool for at least 30 minutes before starting any work.
  • Wear gloves and safety glasses to protect yourself from hot oil and metal.

Locating the Oil Filler Cap

  1. Open the hood of your car.
  2. Locate the engine. It’s usually located in the front of the car.
  3. Look for a black or yellow plastic cap with the word “Oil” or “Engine Oil” written on it.

Pouring the Engine Oil

  1. Clean the area around the oil filler cap with a clean rag.
  2. Insert the funnel into the oil filler cap.
  3. Slowly pour the new engine oil into the funnel.
  4. Check the oil level on the engine’s dipstick periodically as you pour the oil.

Checking the Oil Level

  1. Remove the oil dipstick from the engine.
  2. Wipe the dipstick clean with a clean rag.
  3. Reinsert the dipstick into the engine.
  4. Remove the dipstick again and check the oil level.
  5. The oil level should be between the “min” and “max” marks on the dipstick.

Tightening the Oil Filler Cap

  1. Once you’ve added enough oil, remove the funnel.
  2. Tighten the oil filler cap by hand.

Replacing the Oil Filter

  1. Locate the oil filter. It’s usually a cylindrical-shaped object located near the bottom of the engine.
  2. Place the oil filter wrench on the oil filter.
  3. Turn the oil filter wrench counterclockwise to loosen the oil filter.
  4. Remove the old oil filter and replace it with the new one.
  5. Tighten the new oil filter by hand, then use the oil filter wrench to tighten it further.

Resetting the Oil Life Monitor

  1. Start the engine and let it idle for a few minutes.
  2. Turn the ignition off.
  3. Press and hold the gas pedal and brake pedal simultaneously.
  4. Turn the ignition on, but do not start the engine.
  5. Release the gas pedal and brake pedal.
  6. The oil life monitor should now be reset.

Tips

  • Always refer to your car’s owner’s manual for specific instructions on how to change the oil and filter.
  • Use the correct type and amount of engine oil for your car.
  • Change your oil and filter regularly to keep your engine running smoothly.

Like this post? Please share to your friends:
Leave a Reply