My Summer Car Engine Hoist

Introduction

My Summer Car is a popular vehicle simulation game that allows players to build, repair, and drive a variety of cars. One of the most important tasks in the game is replacing the engine, which can be a difficult and time-consuming process. However, with the help of an engine hoist, the job can be made much easier.

Materials

To build an engine hoist, you will need the following materials:

* 4 pieces of 2×4 lumber, each 8 feet long
* 4 pieces of 2×4 lumber, each 4 feet long
* 1 piece of 3/4-inch plywood, 4 feet by 8 feet
* 1 pair of 3-inch casters
* 1 pair of 4-inch casters
* 1 1/2-inch bolt, 12 inches long
* 1 1/2-inch nut
* 1 1/2-inch washer
* Wood screws
* Nails

Instructions

1. Cut the 2×4 lumber into the following lengths:
* 4 pieces, 8 feet long
* 4 pieces, 4 feet long
2. Assemble the base of the hoist by attaching the 8-foot pieces of 2×4 to the 4-foot pieces of 2×4, as shown in the diagram below.
3. Attach the plywood to the top of the base, using wood screws.
4. Attach the casters to the bottom of the base, using wood screws.
5. Cut a hole in the center of the plywood, large enough to fit the engine.
6. Insert the bolt through the hole in the plywood and secure it with the nut and washer.
7. Attach the hook to the bolt.

Using the Engine Hoist

To use the engine hoist, simply place the hook over the engine and lift it into place. The casters will allow you to easily move the hoist around the garage.

Tips

* Make sure that the base of the hoist is sturdy enough to support the weight of the engine.
* Use a chain or rope to secure the engine to the hook.
* Be careful when lifting the engine, as it can be heavy and awkward.

Conclusion

An engine hoist is a valuable tool for any My Summer Car player. It can make the job of replacing the engine much easier and safer. By following the instructions in this post, you can build your own engine hoist for a fraction of the cost of a store-bought model.