How to Remove Car Engine Cover on 2007 Eclipse

Tools and Materials

• 10mm socket wrench
• Ratchet
• Shop towel

Safety Precautions

• Park the car on a level surface and engage the parking brake.
• Allow the engine to cool completely before starting work.
• Disconnect the negative battery terminal.

Step-by-Step Instructions

1. Locate the Engine Cover Bolts

Open the hood and locate the four 10mm bolts that secure the engine cover to the engine.

2. Remove the Bolts

Use the 10mm socket wrench and ratchet to loosen and remove the four bolts.

3. Lift the Engine Cover

Carefully lift the engine cover up and away from the engine.

4. Disconnect the Electrical Connector

If your Eclipse has an electrical connector on the back of the engine cover, disconnect it.

5. Remove the Engine Cover

Once the electrical connector is disconnected, completely remove the engine cover from the engine compartment.

Reinstallation

To reinstall the engine cover, follow the steps in reverse order.

Tips

• If the engine cover is stuck, gently pry it up with a shop towel.
• Be careful not to damage the electrical connector when disconnecting it.
• Tighten the bolts securely, but do not overtighten them.

Conclusion

Removing the car engine cover on a 2007 Eclipse is a straightforward process that can be completed in a few minutes.