How to Put Oil in Engine Car Mechanic Simulator

In Car Mechanic Simulator, you will need to change the oil in your car’s engine on a regular basis. This is a relatively simple task, but it is important to do it correctly in order to keep your car running smoothly.

Step 1: Gather your materials

You will need the following materials to change the oil in your car’s engine:

* New oil filter
* New oil
* Oil pan
* Funnel
* Rags

Step 2: Safety first

Before you start working on your car, it is important to take some safety precautions. Park your car on a level surface and engage the parking brake. Allow the engine to cool down completely before you start working on it.

Step 3: Locate the oil drain plug

The oil drain plug is typically located on the bottom of the oil pan. It is usually a 17mm bolt.

Step 4: Place the oil pan under the drain plug

Place the oil pan under the drain plug to catch the old oil.

Step 5: Remove the drain plug

Use a wrench to loosen the drain plug. Be careful not to drop the bolt into the oil pan.

Step 6: Allow the oil to drain

Allow the old oil to drain completely into the oil pan. This may take several minutes.

Step 7: Replace the drain plug

Once the oil has drained completely, replace the drain plug. Tighten the bolt until it is snug.

Step 8: Locate the oil filter

The oil filter is typically located on the side of the engine. It is usually a black or silver cylinder.

Step 9: Remove the oil filter

Use an oil filter wrench to loosen the oil filter. Be careful not to spill any oil.

Step 10: Apply a thin coat of oil to the new oil filter gasket

Apply a thin coat of oil to the gasket on the new oil filter. This will help to create a seal and prevent leaks.

Step 11: Install the new oil filter

Screw the new oil filter onto the engine by hand. Tighten the filter until it is snug.

Step 12: Add new oil to the engine

Use a funnel to add new oil to the engine. Add oil until the dipstick reads full.

Step 13: Check for leaks

Start the engine and let it idle for a few minutes. Check for any leaks around the oil drain plug and oil filter.

Step 14: Dispose of the old oil and filter

Dispose of the old oil and filter according to your local regulations.

Conclusion

Changing the oil in your car’s engine is a relatively simple task that can be completed in about 30 minutes. By following these steps, you can keep your car running smoothly for years to come.