How to Put Engine on Subframe My Summer Car

Step 1: Gather Your Tools and Materials

You will need the following tools and materials to complete this task:

Engine hoist
Engine stand
Subframe
Engine mounts
Bolts and nuts
Wrench
Socket set

Step 2: Prepare the Engine

Before you can put the engine on the subframe, you need to prepare it. This includes removing the old engine mounts and cleaning the engine block.

Use a wrench to remove the bolts that hold the old engine mounts in place.
Once the old engine mounts are removed, use a wire brush to clean the engine block.

Step 3: Install the Engine Mounts

Once the engine is prepared, you can install the new engine mounts. The engine mounts are responsible for holding the engine in place on the subframe.

Place the new engine mounts on the engine block.
Use a wrench to tighten the bolts that hold the engine mounts in place.

Step 4: Place the Engine on the Subframe

Now that the engine mounts are installed, you can place the engine on the subframe.

Use an engine hoist to lift the engine onto the subframe.
Once the engine is in place, use a wrench to tighten the bolts that hold the engine to the subframe.

Step 5: Connect the Engine to the Transmission

Once the engine is on the subframe, you need to connect it to the transmission. The transmission is responsible for transferring power from the engine to the wheels.

Use a wrench to remove the bolts that hold the transmission in place.
Once the transmission is removed, use a socket set to connect the engine to the transmission.

Step 6: Install the Radiator and Other Components

Once the engine is connected to the transmission, you can install the radiator and other components.

Use a wrench to install the radiator.
Use a socket set to connect the hoses to the radiator.
Use a wrench to install the other components, such as the alternator, starter, and power steering pump.