How to Put a Bigger Engine in a Car
Putting a bigger engine in a car is a major project, but it can be a rewarding one. A bigger engine can give your car more power and performance, and it can also improve your car’s fuel economy. However, before you start, you need to make sure that you have the right tools and equipment, and that you know what you’re doing. Otherwise, you could end up damaging your car.
Step 1: Gather Your Tools and Equipment
You will need the following tools and equipment to put a bigger engine in a car:
- Engine hoist
- Engine stand
- Floor jack
- Jack stands
- Wrenches
- Sockets
- Torque wrench
- Gasket maker
- Anti-seize compound
Step 2: Remove the Old Engine
Once you have all of your tools and equipment, you can start removing the old engine. To do this, you will need to:
1. Disconnect the battery.
2. Remove the air cleaner.
3. Disconnect the fuel lines and fuel injectors.
4. Disconnect the exhaust system.
5. Disconnect the wiring harness.
6. Remove the bolts that hold the engine in place.
7. Lift the engine out of the car using an engine hoist.
Step 3: Install the New Engine
Once you have removed the old engine, you can install the new engine. To do this, you will need to:
1. Lower the new engine into the car using an engine hoist.
2. Bolt the engine in place.
3. Connect the wiring harness.
4. Connect the exhaust system.
5. Connect the fuel lines and fuel injectors.
6. Install the air cleaner.
7. Connect the battery.
Step 4: Start the Engine
Once you have installed the new engine, you can start it up. To do this, you will need to:
1. Turn the key to the “on” position.
2. Wait for the fuel pump to prime.
3. Turn the key to the “start” position.
Step 5: Break In the Engine
Once you have started the engine, you need to break it in. To do this, you will need to drive the car for about 500 miles. During this time, you should avoid driving the car at high speeds or under heavy load. This will help the engine to break in properly and last longer.
Conclusion
Putting a bigger engine in a car is a major project, but it can be a rewarding one. By following these steps, you can safely and successfully install a bigger engine in your car.
