How to Pump Oil Out of a Car Engine

Changing the oil in your car is a relatively simple task that can be completed in about 30 minutes. However, if you don’t have the right tools or if you’re not comfortable working on your car, it’s best to leave this job to a mechanic.

Here are the steps on how to pump oil out of a car engine:

1. Gather your materials.

You will need the following materials:

A new oil filter
New oil (check your owner’s manual for the correct type and amount)
An oil filter wrench
A funnel
A drain pan
A pair of gloves
Safety glasses

2. Prepare your car.

Park your car on a level surface. Turn off the engine and allow it to cool down completely. Engage the parking brake.

3. Locate the oil pan.

The oil pan is located at the bottom of the engine. It is usually made of metal and has a drain plug.

4. Place the drain pan under the oil pan.

Make sure that the drain pan is large enough to catch all of the oil that will drain out of the engine.

5. Loosen the drain plug.

Use the oil filter wrench to loosen the drain plug. Be careful not to overtighten the drain plug, as this can damage the oil pan.

6. Allow the oil to drain.

Allow all of the oil to drain out of the engine. This may take several minutes.

7. Replace the drain plug.

Once all of the oil has drained out of the engine, tighten the drain plug. Be careful not to overtighten the drain plug, as this can damage the oil pan.

8. Locate the oil filter.

The oil filter is usually located near the top of the engine. It is a cylindrical-shaped component that has a black cap.

9. Remove the oil filter.

Use the oil filter wrench to remove the oil filter. Be careful not to spill any oil.

10. Apply a thin coat of new oil to the gasket of the new oil filter.

This will help to create a seal and prevent leaks.

11. Install the new oil filter.

Screw the new oil filter onto the engine by hand. Then, use the oil filter wrench to tighten the oil filter. Be careful not to overtighten the oil filter, as this can damage the filter.