How to Open a Hot Wheels Engine Car Carry Case

Step 1: Locate the Release Buttons

The release buttons for the Hot Wheels Engine Car Carry Case are located on either side of the case. They are small, black buttons that are slightly recessed into the plastic.

Step 2: Press and Hold the Release Buttons

Once you have located the release buttons, press and hold them both down simultaneously. You may need to use a bit of force to get them to release.

Step 3: Slide the Top Panel Back

While holding down the release buttons, slide the top panel of the case back towards you. The panel should slide easily, but you may need to wiggle it a bit to get it started.

Step 4: Lift the Top Panel Off

Once the top panel is slid back far enough, you can lift it off of the case. The case will now be open, revealing the cars inside.

Step 5: Remove the Cars

To remove the cars from the case, simply lift them out. The cars are held in place by small pegs that fit into slots in the case.

Step 6: Close the Case

To close the case, simply place the top panel back on and slide it forward until it clicks into place. Make sure that the release buttons are fully engaged before you let go.

Tips

* If you are having trouble opening the case, try using a pair of pliers to grip the release buttons.
* Be careful not to force the case open, as you could damage it.
* If the case is jammed, try tapping it lightly with a hammer or other object.
* If you have any other questions about how to open a Hot Wheels Engine Car Carry Case, please feel free to contact the manufacturer.