How to Make a Car Rotisserie from Engine Stands

A car rotisserie is a great way to make it easier to work on your car. It allows you to rotate the car on its side, which gives you better access to the underside. This can be helpful for a variety of tasks, such as painting, welding, and repairing the frame.

Car rotisseries can be purchased, but they can also be made relatively easily from engine stands. Here is a step-by-step guide on how to make a car rotisserie from engine stands:

Materials:

Two engine stands
4×4 lumber (length will vary depending on the size of your car)
1/2-inch bolts and nuts
Washers
Paint (optional)

Instructions:

Cut the 4×4 lumber to the desired length. The length will vary depending on the size of your car, but it should be long enough to provide adequate support for the car.
Place the engine stands on the ground, facing each other. The distance between the stands should be slightly wider than the width of your car.
Place the 4×4 lumber across the tops of the engine stands, and secure it with bolts and nuts. Make sure to use washers to prevent the bolts from pulling through the wood.
Place the car on the rotisserie. The car should be positioned so that the center of gravity is between the two engine stands.
Secure the car to the rotisserie using straps or chains. Make sure that the car is securely fastened before rotating it.
To rotate the car, simply turn the handles on the engine stands. The car will rotate smoothly on the rotisserie.

Tips:

When choosing 4×4 lumber, make sure to choose a strong wood that is not likely to split or warp.
Be sure to use enough bolts and nuts to securely fasten the 4×4 lumber to the engine stands.
If you are going to be using the rotisserie outdoors, it is a good idea to paint it to protect it from the elements.
When rotating the car, be sure to do so slowly and carefully. Sudden movements could cause the car to fall off the rotisserie.

Conclusion:

Making a car rotisserie from engine stands is a relatively easy and inexpensive way to make it easier to work on your car. By following the steps outlined in this guide, you can build a safe and stable rotisserie that will allow you to rotate your car on its side for a variety of tasks.