How to Lift Engine Out of Car

Introduction

Lifting an engine out of a car can be a daunting task, but it’s actually not as difficult as it seems. With the right tools and a little bit of patience, you can do it yourself in a few hours.

Tools and Materials

Before you start, you’ll need to gather the following tools and materials:

* An engine hoist
* A cherry picker
* A set of jack stands
* A torque wrench
* A set of sockets and wrenches
* A flathead screwdriver
* A Phillips screwdriver
* A pair of pliers
* A hammer
* A chisel
* Safety glasses
* Gloves

Safety First

Before you begin, it’s important to take some safety precautions. Make sure you have a clear work area and that the car is parked on a level surface. Disconnect the battery and allow the engine to cool completely before you start working.

Step 1: Prepare the Car

Start by disconnecting the battery and removing the air filter. Then, drain the coolant and oil from the engine. Next, remove the radiator and the fan.

Step 2: Remove the Accessories

Next, you’ll need to remove all of the accessories from the engine. This includes the alternator, the starter, the power steering pump, and the air conditioning compressor. Be sure to disconnect all of the hoses and wires before you remove the accessories.

Step 3: Attach the Engine Hoist

Once the accessories are removed, you can attach the engine hoist to the engine. Be sure to use a properly rated hoist and to follow the manufacturer’s instructions for attaching it.

Step 4: Lift the Engine

Slowly and carefully lift the engine out of the car. Be sure to keep the engine level as you lift it. Once the engine is clear of the car, you can place it on a cherry picker or a set of jack stands.

Step 5: Remove the Engine Mounts

Next, you’ll need to remove the engine mounts. Be careful not to damage the engine or the mounts. Once the mounts are removed, you can separate the engine from the transmission.

Step 6: Remove the Transmission

If you’re also removing the transmission, you’ll need to remove the driveshaft and the bell housing. Be careful not to damage the transmission or the bell housing. Once the transmission is removed, you can set it aside.

Step 7: Reassembly

Once the engine and transmission are removed, you can reassemble them in the reverse order of disassembly. Be sure to torque all of the bolts to the manufacturer’s specifications.

Conclusion

Lifting an engine out of a car is a challenging task, but it’s definitely doable with the right tools and a little bit of patience. Just be sure to take your time and follow the instructions carefully.