## How to Engine Swap in Car Mechanic Simulator 2021
Introduction
Engine swapping is a complex and time-consuming process, but it can be extremely rewarding. In Car Mechanic Simulator 2021, you can swap out an engine in any car in the game. This can be a great way to improve the performance of a car, or to simply give it a new look.
In this guide, we’ll walk you through the steps on how to engine swap in Car Mechanic Simulator 2021. We’ll cover everything from removing the old engine to installing the new one.
Tools and Materials
Before you begin, you’ll need to gather the following tools and materials:
* A set of wrenches
* A set of sockets
* A set of screwdrivers
* A torque wrench
* A jack
* Jack stands
* An engine hoist
* A new engine
Safety First!
Before you begin working on your car, it’s important to take some safety precautions. Make sure the car is parked on a level surface and that the parking brake is engaged. Disconnect the battery to prevent any electrical shocks. And finally, wear safety glasses and gloves to protect yourself from any flying debris.
Step 1: Remove the Old Engine
1. **Disconnect the battery.** This is the first and most important step. Disconnecting the battery will prevent any electrical shocks while you’re working on the car.
2. **Drain the coolant.** The coolant is a liquid that helps to keep the engine cool. It’s important to drain the coolant before you remove the engine, or else it could spill out and cause a mess.
3. **Disconnect the radiator hoses.** The radiator hoses are the two hoses that connect the radiator to the engine. Disconnect the hoses from the engine and then cap them off to prevent any coolant from leaking out.
4. **Disconnect the exhaust system.** The exhaust system is the series of pipes that carry exhaust gases away from the engine. Disconnect the exhaust system from the engine and then cap off the exhaust manifold to prevent any exhaust gases from escaping.
5. **Disconnect the transmission.** The transmission is the part of the car that transfers power from the engine to the wheels. Disconnect the transmission from the engine by removing the bolts that hold it in place.
6. **Remove the engine mounts.** The engine mounts are the brackets that hold the engine in place. Remove the bolts that hold the engine mounts in place and then lift the engine out of the car.
Step 2: Install the New Engine
1. **Clean the engine bay.** Before you install the new engine, it’s important to clean the engine bay. This will help to remove any dirt or debris that could get into the engine and cause damage.
2. **Install the engine mounts.** The first step to installing the new engine is to install the engine mounts. The engine mounts are the brackets that hold the engine in place. Bolt the engine mounts into place and then lower the engine into the car.
3. **Connect the transmission.** The next step is to connect the transmission to the engine. Bolt the transmission into place and then connect the driveshaft.
4. **Connect the exhaust system.** The next step is to connect the exhaust system to the engine. Bolt the exhaust system into place and then connect the exhaust manifold.
5. **Connect the radiator hoses.** The next step is to connect the radiator hoses to the engine. Bolt the radiator hoses into place and then fill the radiator with coolant.
6. **Connect the battery.** The final step is to connect the battery. Connect the positive terminal to the positive terminal on the battery and then connect the negative terminal to the negative terminal on the battery.
Conclusion
Engine swapping is a complex and time-consuming process, but it can be extremely rewarding. By following the steps in this guide, you can successfully engine swap in Car Mechanic Simulator 2021.
