How to Clean Up Carbon From a Car Engine

Introduction

Carbon is a natural byproduct of the combustion process in a car engine. Over time, carbon can build up on the engine’s valves, pistons, and other components, which can lead to a number of problems, including:

• Reduced engine power
• Increased fuel consumption
• Rough idling
• Knocking or pinging noises
• Emissions failures

Fortunately, there are a number of ways to clean up carbon from a car engine. Some of these methods are simple and can be done at home, while others require specialized tools and equipment. In this article, we’ll discuss the different methods of carbon cleanup and provide step-by-step instructions on how to perform them.

Methods for Cleaning Up Carbon from a Car Engine

1. Seafoam Treatment

Seafoam is a commercially available product that can be used to clean up carbon from a car engine. Seafoam is typically added to the fuel tank or intake manifold, and it works by breaking down carbon deposits and allowing them to be burned off through the exhaust system.

Instructions:

1. Add a can of Seafoam to your fuel tank, or to the intake manifold through a vacuum line.
2. Drive your car for at least 30 minutes, or according to the product instructions.
3. You may notice some smoke coming from your exhaust during this time.
4. After 30 minutes, stop your car and let it idle for 5 minutes.
5. Repeat steps 1-4 if necessary.

2. Walnut Shell Blasting

Walnut shell blasting is a more aggressive method of carbon cleanup that involves using a pressurized stream of walnut shells to blast away carbon deposits from the engine’s valves and pistons.

Instructions:

1. Remove the intake manifold from the engine.
2. Use a walnut shell blasting gun to blast away carbon deposits from the valves and pistons.
3. Be careful not to damage the engine’s components with the blast gun.
4. Once the carbon deposits have been removed, reassemble the intake manifold.

3. Chemical Cleaning

Chemical cleaning is a method of carbon cleanup that involves using a chemical solvent to dissolve carbon deposits from the engine’s components.

Instructions:

1. Remove the intake manifold from the engine.
2. Apply a chemical solvent to the carbon deposits, and let it sit for the amount of time specified by the product instructions.
3. Use a brush or rag to scrub away the dissolved carbon deposits.
4. Rinse the engine components with water, and reassemble the intake manifold.

4. Hydrogen Decarbonization

Hydrogen decarbonization is a method of carbon cleanup that involves introducing hydrogen gas into the engine’s intake manifold.

Instructions:

1. Attach a hydrogen dec