## How to Clean Engine Oil Spill on Car
Engine oil spills can be a messy and potentially hazardous problem. If not cleaned up properly, oil spills can damage your car’s paint and engine, and can also pose a slipping hazard.
Luckily, cleaning up an engine oil spill is a relatively simple process. With a few basic supplies and a little bit of time, you can get your car looking clean and safe again.
Supplies You’ll Need
* Rags or paper towels
* Degreaser
* Soap and water
* Bucket or hose
* Gloves (optional)
Safety First
Before you start cleaning up the oil spill, it’s important to take some safety precautions. Engine oil can be harmful to your skin and eyes, so it’s important to wear gloves and avoid contact with your skin. If you do get oil on your skin, wash it off immediately with soap and water.
Step 1: Soak Up the Oil
The first step is to soak up as much of the oil as possible. Use rags or paper towels to blot up the oil. Be sure to use clean rags or towels for each blot, as dirty rags will only spread the oil around.
Step 2: Degrease the Area
Once you’ve soaked up the oil, it’s time to degrease the area. This will help to remove any remaining oil and prevent it from damaging your car’s paint or engine.
There are a number of different degreasers available on the market. You can find degreasers specifically designed for automotive use, or you can use a household degreaser such as dish soap.
To use a degreaser, simply apply it to the affected area and scrub with a rag or brush. Be sure to rinse the area thoroughly with water after degreasing.
Step 3: Wash the Area
Once you’ve degreased the area, it’s time to wash it with soap and water. This will help to remove any remaining degreaser and oil residue.
To wash the area, simply use a bucket or hose to rinse it with water. Then, apply soap to the area and scrub with a rag or brush. Rinse the area thoroughly with water again.
Step 4: Dry the Area
Once you’ve washed the area, it’s important to dry it thoroughly. This will help to prevent water spots and rust.
To dry the area, simply use a clean rag or towel to wipe it down. You can also use a hair dryer to speed up the drying process.
Step 5: Inspect the Area
Once the area is dry, inspect it for any remaining oil or degreaser residue. If you find any residue, repeat the cleaning process until the area is clean.
Tips for Preventing Engine Oil Spills
The best way to deal with an engine oil spill is to prevent it from happening in the first place. Here are a few tips to help you prevent engine oil spills:
* Check your oil level regularly and add oil as needed.
* Replace your oil filter regularly.
* Inspect your engine for any leaks and repair them as needed.
* Park your car on a level surface when possible.
* Use an oil pan when changing your oil.
* Dispose of used oil properly.
By following these tips, you can help to prevent engine oil spills and keep your car looking clean and safe.
