How to Clean Car Engine with Power Wash

Materials you’ll need:

1. Power washer
2. Engine degreaser
3. Soft-bristled brush
4. Clean rags or towels
5. Safety glasses
6. Gloves

Step-by-step instructions:

1. Prepare the engine.

Let the engine cool down completely before you start cleaning it. Disconnect the battery to prevent any electrical shorts. Remove any loose parts or covers that could get in the way.

2. Apply the engine degreaser.

Spray the engine degreaser liberally over the entire engine, avoiding any electrical components. Let it sit for a few minutes to allow the degreaser to break down the dirt and grime.

3. Scrub the engine.

Use a soft-bristled brush to scrub the engine, paying special attention to any areas that are particularly dirty. Be careful not to use too much force, as you could damage the engine.

4. Rinse the engine.

Use the power washer to rinse the engine thoroughly. Hold the nozzle about 12 inches away from the engine and use a gentle stream of water. Avoid spraying directly into any electrical components.

5. Dry the engine.

Use clean rags or towels to dry the engine thoroughly. This will help to prevent rust and corrosion.

6. Reconnect the battery.

Once the engine is completely dry, reconnect the battery.

Tips:

• Use a low-pressure setting on the power washer to avoid damaging the engine.
• Be careful not to spray water directly into any electrical components.
• If you’re not sure how to clean a particular part of the engine, consult your vehicle’s owner’s manual.
• Clean the engine regularly to prevent the buildup of dirt and grime.

Conclusion

Cleaning your car engine with a power wash is a relatively easy and inexpensive way to keep it running smoothly. By following these simple steps, you can keep your engine clean and free of dirt and grime.