How to Change the Car Engine Filter

Materials you will need

• New engine filter
• Wrench or socket set
• Funnel
• Oil
• Rags

Safety first!

• Park your car on a level surface and engage the parking brake.
• Allow the engine to cool completely before you start working.
• Wear gloves to protect your hands from oil and dirt.

Step-by-step instructions

Step 1: Locate the engine filter

The engine filter is usually located in a black plastic housing on the top of the engine. It may be covered by a plastic cover.

Step 2: Remove the old filter

Use a wrench or socket set to loosen the nut that holds the filter in place. Be careful not to overtighten the nut. Once the nut is loose, you can remove the old filter by hand.

Step 3: Apply a thin layer of oil to the gasket of the new filter

This will help to create a seal and prevent leaks.

Step 4: Install the new filter

Screw the new filter into place by hand until it is snug. Then, use the wrench or socket set to tighten the nut. Be careful not to overtighten the nut.

Step 5: Add oil to the engine

Use a funnel to add oil to the engine. The amount of oil you need will vary depending on the make and model of your car. Check your owner’s manual for the recommended amount.

Step 6: Check for leaks

Start the engine and let it run for a few minutes. Check for any leaks around the oil filter. If you see any leaks, tighten the nut further.

Step 7: Dispose of the old filter

Dispose of the old filter in a responsible manner. Do not throw it in the trash.

Tips

• It is a good idea to change your car’s engine filter every 5,000 to 10,000 miles.
• If you drive in dusty or dirty conditions, you may need to change the filter more often.
• Changing the engine filter is a relatively easy task that can be done in about 30 minutes.

Conclusion

Changing the car engine filter is an important part of maintaining your vehicle. By following these simple steps, you can keep your engine running smoothly and efficiently.