How to Change Engine Oil for Car

Materials you’ll need:

• New engine oil (check your car’s manual for the recommended type and amount)
• New oil filter
• Oil pan
• Funnel
• Wrench
• Gloves

Safety precautions:

• Allow the engine to cool down before starting.
• Wear gloves to protect your hands from hot oil.
• Dispose of used oil and filter properly.

Step-by-step instructions:

1. Gather your materials and prepare your car

• Park your car on a level surface.
• Engage the parking brake.
• Gather all the materials you’ll need.
• Open the hood and locate the engine oil dipstick.
• Pull out the dipstick and wipe it clean with a rag.
• Reinsert the dipstick and pull it out again to check the oil level.

2. Drain the old oil

• Place the oil pan under the engine oil drain plug.
• Use a wrench to loosen the drain plug.
• Allow the oil to drain completely into the pan.

3. Replace the oil filter

• Locate the oil filter.
• Use a wrench to loosen the oil filter.
• Remove the old oil filter and apply a thin layer of new oil to the gasket of the new filter.
• Screw on the new oil filter by hand until it’s snug.
• Tighten the oil filter using a wrench, but do not overtighten.

4. Add new oil

• Remove the oil filler cap.
• Use a funnel to add new oil to the engine.
• Add oil until the dipstick reads at the «full» mark.

5. Check for leaks

• Start the car and let it run for a few minutes.
• Check under the car for any leaks.
• If you see any leaks, tighten the drain plug or oil filter as needed.

6. Reset the oil life indicator

• Most cars have an oil life indicator that needs to be reset after an oil change.
• Consult your car’s manual for instructions on how to reset the oil life indicator.

Tips:

• Change your engine oil and filter regularly, as recommended by your car’s manufacturer.
• Use the correct type of oil for your car.
• Dispose of used oil and filter properly.
• If you’re not comfortable changing your engine oil yourself, you can take your car to a mechanic.

Conclusion:

Changing your engine oil is a relatively simple task that can be done in about 30 minutes. By following these instructions, you can save money and keep your car running smoothly.