How to Build an Engine in Car Mechanic Simulator 2021

Introduction

Car Mechanic Simulator 2021 is a realistic car mechanic simulator game that allows you to build and repair cars from scratch. One of the most challenging and rewarding aspects of the game is building an engine. This guide will walk you through the steps on how to build an engine in Car Mechanic Simulator 2021.

Step 1: Gather the necessary parts

The first step is to gather all of the necessary parts to build an engine. These parts include:

* **Engine block**
* **Crankshaft**
* **Pistons**
* **Connecting rods**
* **Camshaft**
* **Valves**
* **Timing belt**
* **Oil pump**
* **Water pump**

You can find these parts in the parts catalog or by scavenging them from other cars.

Step 2: Assemble the engine block

The next step is to assemble the engine block. The engine block is the main component of the engine and it houses the crankshaft, pistons, and connecting rods.

To assemble the engine block, follow these steps:

1. Place the engine block on the workbench.
2. Install the crankshaft into the engine block.
3. Install the pistons into the engine block.
4. Install the connecting rods onto the crankshaft.
5. Install the camshaft into the engine block.
6. Install the valves into the engine block.

Step 3: Install the timing belt

The next step is to install the timing belt. The timing belt is a belt that drives the camshaft and keeps the valves in time with the pistons.

To install the timing belt, follow these steps:

1. Wrap the timing belt around the crankshaft pulley.
2. Wrap the timing belt around the camshaft pulley.
3. Tension the timing belt.

Step 4: Install the oil pump

The next step is to install the oil pump. The oil pump is a pump that circulates oil throughout the engine.

To install the oil pump, follow these steps:

1. Place the oil pump on the engine block.
2. Install the oil filter onto the oil pump.
3. Connect the oil lines to the oil pump.

Step 5: Install the water pump

The next step is to install the water pump. The water pump is a pump that circulates water throughout the engine.

To install the water pump, follow these steps:

1. Place the water pump on the engine block.
2. Install the water pump gasket.
3. Connect the water hoses to the water pump.

Step 6: Test the engine

The final step is to test the engine. To test the engine, follow these steps:

1. Connect the battery to the engine.
2. Turn the ignition key to the “on” position.
3. Listen for the engine to start.

If the engine starts, you have successfully built an engine!

Conclusion

Building an engine in Car Mechanic Simulator 2021 is a challenging but rewarding experience. By following the steps in this guide, you can build an engine that will power your car to victory!