How to Attach Trans to Engine Out of Car

Tools and Materials

• Transmission jack
• Engine hoist
• Socket wrench set
• Torque wrench
• Alignment tool
• Transmission fluid
• New transmission mount

Safety Precautions

• Wear safety glasses and gloves.
• Do not work on a hot engine.
• Use caution when lifting heavy objects.

Step-by-Step Instructions

1. Prepare the Engine and Transmission

1. Remove the engine and transmission from the vehicle.
2. Clean the mating surfaces of the engine and transmission.
3. Inspect the transmission mount for damage and replace it if necessary.

2. Position the Transmission

1. Place the transmission on the transmission jack.
2. Raise the transmission jack until the transmission is aligned with the engine.
3. Use an alignment tool to ensure that the transmission is properly aligned with the engine.

3. Attach the Transmission to the Engine

1. Apply a thin layer of transmission fluid to the input shaft of the transmission.
2. Carefully slide the transmission onto the engine.
3. Tighten the transmission mounting bolts to the specified torque.

4. Install the Transmission Mount

1. Place the new transmission mount on the engine.
2. Tighten the transmission mount bolts to the specified torque.

5. Fill the Transmission with Fluid

1. Remove the fill plug from the transmission.
2. Fill the transmission with the specified amount of transmission fluid.
3. Replace the fill plug and tighten it to the specified torque.

Tips

• Use a torque wrench to ensure that all bolts are tightened to the specified torque.
• If you are not comfortable performing this repair, consult a qualified mechanic.

Conclusion

Attaching a transmission to an engine out of a car is a complex task, but it can be done with the right tools and materials. By following these step-by-step instructions, you can safely and successfully reattach your transmission.