- How to Remove Excess Oil from Car Engine
- Materials You’ll Need:
- Steps:
- 1. Safety First
- 2. Locate the Oil Pan
- 3. Place the Oil Pan
- 4. Remove the Drain Plug
- 5. Drain the Oil
- 6. Replace the Drain Plug
- 7. Remove the Oil Filter
- 8. Apply Oil to the New Filter
- 9. Install the New Filter
- 10. Add New Oil
- 11. Check the Oil Level
- 12. Start the Engine
- 13. Check for Leaks
- Additional Tips:
- Conclusion
How to Remove Excess Oil from Car Engine
Materials You’ll Need:
- Oil pan
- Funnel
- Oil filter wrench
- New oil filter
- New oil (check your owner’s manual for the correct type and amount)
Steps:
1. Safety First
Before you begin, park your car on a level surface and let the engine cool down completely. This will help prevent burns and other accidents.
2. Locate the Oil Pan
The oil pan is usually located at the bottom of the engine. It’s a large, metal pan that holds the oil. Find the oil pan drain plug, which is usually a bolt located at the bottom of the pan.
3. Place the Oil Pan
Slide the oil pan under the drain plug. Make sure the pan is large enough to catch all of the oil that will drain out.
4. Remove the Drain Plug
Use the oil filter wrench to loosen the drain plug. Be careful not to overtighten or strip the bolt.
5. Drain the Oil
Allow the oil to drain completely into the oil pan. This may take several minutes.
6. Replace the Drain Plug
Once the oil has drained, clean the drain plug and apply a new washer. Tighten the drain plug until it is snug.
7. Remove the Oil Filter
Use the oil filter wrench to loosen the oil filter. Be careful not to spill any oil.
8. Apply Oil to the New Filter
Apply a thin coat of new oil to the gasket of the new oil filter. This will help create a seal.
9. Install the New Filter
Screw the new oil filter onto the engine by hand until it is snug. Do not overtighten.
10. Add New Oil
Use the funnel to add new oil to the engine. Add the amount of oil specified in your owner’s manual.
11. Check the Oil Level
Use the dipstick to check the oil level. The oil level should be between the “min” and “max” marks on the dipstick.
12. Start the Engine
Start the engine and let it run for a few minutes. This will circulate the new oil throughout the engine.
13. Check for Leaks
Check under the car for any leaks. If you see any leaks, tighten the drain plug or oil filter until the leak stops.
Additional Tips:
- Change your oil regularly according to your owner’s manual. This will help prevent sludge buildup and other problems.
- Check your oil level frequently. This will help you catch any leaks early on.
- If you’re not comfortable changing your oil yourself, you can take your car to a mechanic. They will be able to change the oil and filter for you.
Conclusion
Removing excess oil from your car engine is a simple process that can be done in a few minutes. By following the steps outlined in this article, you can keep your engine running smoothly and efficiently.
