- Engine Oil Change in Car
- How Often Should You Change Your Engine Oil?
- What Type of Engine Oil Should You Use?
- How to Change Your Engine Oil
- 1. Gather Your Materials
- 2. Safety First
- 3. Locate the Oil Drain Plug
- 4. Drain the Old Oil
- 5. Replace the Oil Filter
- 6. Replace the Oil Drain Plug
- 7. Add New Engine Oil
- 8. Start the Engine and Check for Leaks
- Conclusion
Engine Oil Change in Car
Engine oil is a crucial fluid that lubricates the moving parts of your car’s engine, reducing friction and wear. Over time, engine oil can become contaminated with dirt, metal shavings, and other particles, which can reduce its effectiveness. That’s why it’s important to change your engine oil regularly according to the manufacturer’s recommendations.
How Often Should You Change Your Engine Oil?
The frequency of oil changes varies depending on the make and model of your car, as well as your driving habits. However, most manufacturers recommend changing your oil every 3,000 to 5,000 miles. If you drive in severe conditions, such as stop-and-go traffic or dusty roads, you may need to change your oil more often.
What Type of Engine Oil Should You Use?
When choosing engine oil, it’s important to select the right type for your car. The oil should meet the manufacturer’s specifications for your engine’s viscosity and performance requirements. You can find the recommended oil type in your car’s owner’s manual.
How to Change Your Engine Oil
Changing your engine oil is a relatively simple task that you can do yourself with the right tools and materials. Here are the steps involved:
1. Gather Your Materials
* New engine oil
* New oil filter
* Oil filter wrench
* Funnel
* Drain pan
* Rags
2. Safety First
* Park your car on a level surface and engage the parking brake.
* Allow the engine to cool for at least 30 minutes before starting work.
* Wear gloves to protect your hands from hot oil.
3. Locate the Oil Drain Plug
* The oil drain plug is usually located on the bottom of the oil pan. It is typically a 17mm bolt.
4. Drain the Old Oil
* Place the drain pan under the oil drain plug.
* Use the oil filter wrench to loosen the drain plug and allow the oil to drain into the pan.
* Allow the oil to drain completely.
5. Replace the Oil Filter
* Locate the oil filter and use the oil filter wrench to loosen it.
* Apply a thin coat of new engine oil to the gasket of the new oil filter.
* Screw on the new oil filter by hand until it is snug.
* Tighten the oil filter an additional 3/4 to 1 turn using the oil filter wrench.
6. Replace the Oil Drain Plug
* Clean the oil drain plug and apply a new washer if necessary.
* Screw the oil drain plug back into the oil pan and tighten it securely.
7. Add New Engine Oil
* Use the funnel to add new engine oil to the engine.
* Add the amount of oil specified in your car’s owner’s manual.
* Check the oil level using the dipstick and add more oil if necessary.
8. Start the Engine and Check for Leaks
* Start the engine and let it run for a few minutes.
* Check for any leaks around the oil drain plug and oil filter.
* If there are no leaks, turn off the engine and check the oil level again.
Conclusion
Changing your engine oil is an important part of maintaining your car’s performance and longevity. By following these steps, you can easily change your engine oil yourself and save money on maintenance costs.
