How to Engine Swap in Car Mechanic Simulator 2021

1. Gather the necessary tools and materials

Before you begin, you will need to gather the following tools and materials:

1. A new engine
2. An engine hoist
3. A set of wrenches
4. A set of sockets
5. A torque wrench
6. A transmission jack
7. A floor jack
8. A jack stand
9. A set of safety glasses
10. A pair of gloves

2. Prepare the car

Once you have gathered the necessary tools and materials, you need to prepare the car for the engine swap. This involves the following steps:

1. Park the car on a level surface and engage the parking brake.
2. Open the hood and disconnect the battery.
3. Remove the air cleaner assembly.
4. Drain the coolant from the radiator.
5. Drain the oil from the engine.
6. Remove the exhaust system.
7. Remove the driveshaft.
8. Remove the transmission.

3. Remove the old engine

Once the car is prepared, you can remove the old engine. This involves the following steps:

1. Attach the engine hoist to the old engine.
2. Lift the old engine out of the car.
3. Set the old engine on the ground.

4. Install the new engine

Once the old engine is removed, you can install the new engine. This involves the following steps:

1. Attach the engine hoist to the new engine.
2. Lift the new engine into the car.
3. Lower the new engine into place.
4. Bolt the new engine to the transmission.
5. Install the driveshaft.
6. Install the exhaust system.
7. Install the air cleaner assembly.
8. Fill the engine with oil.
9. Fill the radiator with coolant.
10. Connect the battery.

5. Test the new engine

Once the new engine is installed, you need to test it to make sure it is running properly. This involves the following steps:

1. Start the engine.
2. Check for any leaks.
3. Listen for any unusual noises.
4. Take the car for a test drive.

6. Troubleshooting

If you encounter any problems during the engine swap, there are a few things you can do to troubleshoot the issue:

• Check the connections between the engine and the transmission.
• Check the connections between the engine and the exhaust system.
• Check the connections between the engine and the air cleaner assembly.
• Check the connections between the engine and the battery.
• Check the connections between the engine and the radiator.

7. Conclusion

Engine swapping is a complex and time-consuming process, but it is a rewarding experience. By following the steps outlined in this guide, you can successfully engine swap your car and get it back on the road.