Best Engine Oil for Cars

What is engine oil?

Engine oil is a lubricant that helps to reduce friction between moving parts in an engine. It also helps to cool the engine and prevent wear and tear. Engine oil is typically made from a base oil and a variety of additives that give it specific properties.

Types of engine oil

There are two main types of engine oil: conventional oil and synthetic oil.

• Conventional oil is made from refined crude oil. It is the most common type of engine oil and is typically less expensive than synthetic oil.
• Synthetic oil is made from man-made chemicals. It is more expensive than conventional oil, but it offers a number of advantages, including:
• Better protection against wear and tear
• Improved fuel economy
• Longer oil change intervals

How to choose the right engine oil for your car

The best engine oil for your car will depend on a number of factors, including the make and model of your car, the age of your car, and your driving habits.

Here are a few things to consider when choosing engine oil:

• Viscosity is a measure of how thick or thin an oil is. The viscosity of an oil is important because it affects how well the oil will flow through the engine. A thicker oil will provide better protection against wear and tear, but it may also reduce fuel economy. A thinner oil will flow more easily through the engine, but it may not provide as much protection against wear and tear.
• API rating is a measure of how well an oil meets the standards set by the American Petroleum Institute (API). The API rating is typically displayed on the oil container. A higher API rating indicates that the oil meets more stringent standards.
• Manufacturer’s recommendations are always a good place to start when choosing engine oil. Your car’s owner’s manual will typically recommend a specific type of oil for your car.

Best engine oils for cars

Here are some of the best engine oils for cars on the market today:

• Mobil 1 Extended Performance
• Castrol Edge Extended Performance
• Pennzoil Platinum Full Synthetic
• Valvoline Advanced Full Synthetic
• Royal Purple HPS

How to change your engine oil

Changing your engine oil is a relatively simple task that can be performed at home with a few basic tools.

Here are the steps on how to change your engine oil:

1. Gather your materials. You will need:
• New engine oil
• New oil filter
• Oil drain pan
• Wrench
• Funnel
2. Locate the oil drain plug. The oil drain plug is typically located on the bottom of the oil pan. It is usually a 17mm bolt.
3. Place the oil drain pan under the oil drain plug.
4. Loosen the oil drain plug. Be careful not to drop the bolt into the oil pan.
5. Allow the oil to drain into the oil drain pan.
6. Once the oil has drained, replace the oil drain plug.
7. Locate the oil filter. The oil filter is typically located near the top of the engine. It is usually a black or silver cylinder.
8. Remove the oil filter. Be careful not to spill any oil.
9. Apply a thin layer of new oil to the gasket of the new oil filter.
10. Screw on the new oil filter. Tighten it until it is snug.
11. Add new engine oil to the engine. The amount of oil you need will vary depending on your car. Check your owner’s manual for the correct amount.
12. Check the oil level. The oil level should be between the “full” and “add” marks on the dipstick.
13. Start your car and let it run for a few minutes.
14. Check for any leaks. If you see any leaks, tighten the oil drain plug or oil filter until the leak stops.

Conclusion

Engine oil is a critical component of your car’s engine. Choosing the right oil and changing it regularly will help to keep your car running smoothly for many years to come.