Car Won’t Go into Gear When Engine Running Manual
If your car won’t go into gear when the engine is running, there are a few possible causes. Here are some of the most common, along with some tips on how to fix them.
1. The clutch is not fully disengaged
The clutch is a mechanical device that connects the engine to the transmission. When you press the clutch pedal, the clutch disengages, allowing you to shift gears. If the clutch is not fully disengaged, it can make it difficult or impossible to shift gears.
There are a few things that can cause the clutch to not fully disengage, including:
- A worn or damaged clutch disc
- A faulty clutch master cylinder or slave cylinder
- A hydraulic leak in the clutch system
If you suspect that the clutch is not fully disengaging, you can try to adjust the clutch pedal. You can also try to bleed the clutch system to remove any air bubbles. If these steps do not resolve the problem, you may need to have the clutch replaced.
2. The transmission is damaged
The transmission is a complex mechanical device that transfers power from the engine to the wheels. If the transmission is damaged, it can make it difficult or impossible to shift gears.
There are a few things that can damage the transmission, including:
- A worn or damaged gear
- A faulty synchronizer
- A hydraulic leak in the transmission
If you suspect that the transmission is damaged, you should have it inspected by a qualified mechanic. The mechanic will be able to diagnose the problem and recommend the necessary repairs.
3. The shift linkage is damaged
The shift linkage is a mechanical device that connects the gear selector to the transmission. If the shift linkage is damaged, it can make it difficult or impossible to shift gears.
There are a few things that can damage the shift linkage, including:
- A worn or damaged shift cable
- A faulty shift lever
- A loose or damaged shift linkage bracket
If you suspect that the shift linkage is damaged, you can try to inspect it yourself. You can also try to adjust the shift linkage. If these steps do not resolve the problem, you may need to have the shift linkage replaced.
4. The gear selector is out of adjustment
The gear selector is a mechanical device that allows you to select the gear that you want to engage. If the gear selector is out of adjustment, it can make it difficult or impossible to shift gears.
There are a few things that can cause the gear selector to become out of adjustment, including:
- A worn or damaged shift detent
- A faulty gear selector cable
- A loose or damaged gear selector bracket
If you suspect that the gear selector is out of adjustment, you can try to adjust it yourself. You can also try to replace the shift detent. If these steps do not resolve the problem, you may need to have the gear selector replaced.
5. The ignition switch is faulty
The ignition switch is an electrical device that turns on the engine. If the ignition switch is faulty, it can prevent the car from starting. It can also prevent the car from going into gear.
There are a few things that can cause the ignition switch to become faulty, including:
- A worn or damaged ignition switch
- A faulty ignition switch relay
- A loose or damaged ignition switch wire
If you suspect that the ignition switch is faulty, you can try to replace it yourself. You can also try to replace the ignition switch relay. If these steps do not resolve the problem, you may need to have the ignition switch
