Car Mechanic Simulator PS4: How to Put Oil in Engine

Changing the oil in your car is a relatively simple task that can be completed in about 30 minutes. By following these step-by-step instructions, you can save yourself the cost of having a mechanic do it for you.

Materials Needed

• New oil filter
• New oil (check your owner’s manual for the recommended type and amount)
• Oil drain pan
• Funnel
• Wrench

Step-by-Step Instructions

1. Safety First

Before you begin, park your car on a level surface and engage the parking brake. Allow the engine to cool down for at least 30 minutes to avoid burns.

2. Locate the Oil Pan

The oil pan is located at the bottom of the engine. It is usually a black or silver metal pan with a drain plug at the bottom.

3. Place the Drain Pan

Position the oil drain pan under the drain plug.

4. Remove the Drain Plug

Use the wrench to carefully loosen the drain plug. Be careful not to drop the bolt into the oil pan.

5. Drain the Oil

Allow the oil to drain completely into the oil drain pan. This may take several minutes.

6. Replace the Drain Plug

Once the oil has drained, replace the drain plug and tighten it securely with the wrench.

7. Locate the Oil Filter

The oil filter is usually located near the top of the engine. It is a cylindrical-shaped component with a black cap.

8. Remove the Oil Filter

Use the wrench to carefully loosen the oil filter and remove it by hand.

9. Apply Oil to the New Filter

Apply a thin layer of new oil to the gasket of the new oil filter.

10. Install the New Filter

Screw the new oil filter onto the engine by hand until it is snug. Do not overtighten.

11. Add New Oil

Use the funnel to add the recommended amount of new oil to the engine. Check the oil level regularly as you add oil to avoid overfilling.

12. Check the Oil Level

Once you have added the new oil, start the engine and let it idle for a few minutes. Then, turn off the engine and wait a few minutes for the oil to settle. Check the oil level on the dipstick and add more oil if necessary.

13. Reset the Oil Life Indicator

If your car has an oil life indicator, reset it according to the manufacturer’s instructions.

Tips

• Use the correct type of oil for your car. Check your owner’s manual for the recommended type and amount.
• Change your oil regularly according to the manufacturer’s recommended schedule.
• Dispose of used oil and filters properly. Most auto parts stores offer free recycling programs.
• If you are not comfortable changing your oil yourself, take your car to a mechanic.

Conclusion

By following these simple steps, you can easily change the oil in your car’s engine. This is a relatively simple task that can save you time and money in the long run.