Car Mechanic Simulator: No Oil in Engine

Introduction

In Car Mechanic Simulator, it’s important to keep your car’s engine properly lubricated. If the engine runs out of oil, it can cause serious damage. In this guide, we’ll show you how to check your car’s oil level and add oil if necessary.

Checking Your Car’s Oil Level

To check your car’s oil level, you’ll need to:

1. Park your car on a level surface.
2. Turn off the engine and wait a few minutes for the oil to settle.
3. Open the hood and locate the oil dipstick. It’s usually a bright yellow or red handle.
4. Pull out the dipstick and wipe it clean with a rag.
5. Reinsert the dipstick and pull it out again.
6. Check the oil level on the dipstick. The oil should be between the “min” and “max” marks.

Adding Oil to Your Car

If your car’s oil level is low, you’ll need to add oil. To do this, you’ll need:

1. A funnel
2. A quart of oil
3. A rag

To add oil, follow these steps:

1. Locate the oil filler cap on the top of the engine. It’s usually a black or red cap.
2. Remove the oil filler cap and insert the funnel.
3. Add oil to the funnel, a little at a time. Check the oil level on the dipstick frequently as you add oil.
4. Once the oil level is between the “min” and “max” marks, replace the oil filler cap.
5. Wipe up any spilled oil with a rag.

Conclusion

Checking and adding oil to your car’s engine is a simple task that can help keep your car running smoothly. By following the steps in this guide, you can ensure that your car’s engine is properly lubricated and protected from damage.