Car Mechanic Simulator 2021: Engine Cannot Be Started
Troubleshooting Guide
Step 1: Check the Battery
The battery is responsible for providing power to the engine’s starter motor. If the battery is dead or has a weak charge, the engine will not be able to start. Check the battery’s terminals for corrosion or loose connections. If the terminals are corroded, clean them with a wire brush. If the connections are loose, tighten them. If the battery is weak or dead, jump-start the car or replace the battery.
Step 2: Check the Starter Motor
The starter motor is responsible for turning the engine over. If the starter motor is faulty, the engine will not be able to start. Check the starter motor’s connections for corrosion or loose connections. If the connections are corroded, clean them with a wire brush. If the connections are loose, tighten them. If the starter motor is still not working, it may need to be replaced.
Step 3: Check the Fuel System
The fuel system is responsible for supplying fuel to the engine. If the fuel system is faulty, the engine will not be able to start. Check the fuel filter for clogs. If the fuel filter is clogged, replace it. Check the fuel lines for leaks. If the fuel lines are leaking, repair them. Check the fuel pump for proper operation. If the fuel pump is not working, it may need to be replaced.
Step 4: Check the Ignition System
The ignition system is responsible for creating the spark that ignites the fuel in the engine. If the ignition system is faulty, the engine will not be able to start. Check the spark plugs for wear or damage. If the spark plugs are worn or damaged, replace them. Check the spark plug wires for cracks or breaks. If the spark plug wires are cracked or broken, replace them. Check the distributor cap and rotor for cracks or burns. If the distributor cap or rotor is cracked or burned, replace it.
Step 5: Check the Engine
If the previous steps have not solved the problem, the engine itself may be faulty. Check the engine’s compression. If the engine’s compression is low, it may need to be rebuilt. Check the engine’s timing. If the engine’s timing is off, it may need to be adjusted. Check the engine’s valves. If the engine’s valves are not properly adjusted, they may need to be adjusted.
Conclusion
If you have followed all of the steps in this guide and the engine still cannot be started, you may need to take your car to a mechanic for further diagnosis and repair.
