Car Mechanic Simulator 2018: How to Install Different Engines

Introduction

Car Mechanic Simulator 2018 is a popular car mechanic simulation game that allows players to build, repair, and tune cars. One of the most important aspects of the game is installing different engines. This guide will show you how to do it.

Step 1: Gather the Necessary Tools

Before you can start installing a new engine, you will need to gather the necessary tools. These tools include:

* A socket wrench
* A ratchet
* A torque wrench
* A jack
* A jack stand
* A drain pan
* A funnel
* A new engine

Step 2: Prepare the Car

Once you have gathered the necessary tools, you need to prepare the car for the engine installation. This involves:

* Disconnecting the battery
* Draining the oil
* Removing the radiator
* Removing the exhaust system
* Removing the driveshaft
* Removing the transmission

Step 3: Remove the Old Engine

Now that the car is prepared, you can remove the old engine. To do this, you will need to:

* Unbolt the engine mounts
* Lift the engine out of the car
* Set the old engine aside

Step 4: Install the New Engine

With the old engine removed, you can now install the new engine. To do this, you will need to:

* Lift the new engine into the car
* Bolt the engine mounts
* Connect the transmission
* Connect the driveshaft
* Connect the exhaust system
* Connect the radiator
* Fill the engine with oil
* Connect the battery

Step 5: Test the Engine

Once the new engine is installed, you need to test it to make sure it is working properly. To do this, you will need to:

* Start the car
* Let the engine idle for a few minutes
* Drive the car around the block
* Check for any leaks or problems

Conclusion

Installing a new engine in Car Mechanic Simulator 2018 is a relatively simple process. By following the steps in this guide, you can do it yourself and save money on labor costs.