Car Mechanic Simulator 2018: How to Put Engine on Stand

Introduction

In Car Mechanic Simulator 2018, you’ll often need to remove the engine from a car in order to repair or replace it. To do this, you’ll need to put the engine on a stand. This guide will show you how to do it.

Materials

Engine stand
Wrench
Socket set
Engine hoist

Procedure

Park the car on a level surface and engage the parking brake.
Disconnect the battery.
Remove the hood.
Locate the engine mounts and remove the bolts that secure them.
Attach the engine hoist to the engine.
Slowly lift the engine out of the car and place it on the engine stand.
Tighten the bolts that secure the engine to the stand.
Reconnect the battery.
Close the hood.

Tips

Use a torque wrench to tighten the bolts that secure the engine to the stand.
Make sure the engine is stable on the stand before you start working on it.
If you’re not comfortable removing the engine yourself, you can take the car to a mechanic and have them do it for you.

Conclusion

Putting an engine on a stand is a relatively simple process, but it’s important to follow the steps carefully to avoid damaging the engine or yourself. By following the tips in this guide, you can safely and easily remove the engine from your car and start working on it.