Car Mechanic Simulator 2018

How to Put Engine in Car

Putting an engine in a car is a complex process that requires careful planning and execution. In Car Mechanic Simulator 2018, the process is as follows:

1. Remove the old engine

The first step is to remove the old engine. To do this, you will need to:

1. Disconnect the negative battery terminal.
2. Remove the air filter assembly.
3. Remove the intake and exhaust manifolds.
4. Remove the spark plugs.
5. Disconnect the fuel lines.
6. Disconnect the coolant hoses.
7. Disconnect the power steering lines.
8. Disconnect the transmission from the engine.
9. Remove the engine mounts.
10. Lift the engine out of the car.

2. Prepare the new engine

Once the old engine is removed, you need to prepare the new engine for installation. To do this, you will need to:

1. Clean the engine block and cylinder head.
2. Install new gaskets on the engine block and cylinder head.
3. Install new piston rings.
4. Install new spark plugs.
5. Install new fuel lines.
6. Install new coolant hoses.
7. Install new power steering lines.
8. Install new engine mounts.

3. Install the new engine

Once the new engine is prepared, you can install it in the car. To do this, you will need to:

1. Lower the engine into the car.
2. Install the engine mounts.
3. Connect the transmission to the engine.
4. Connect the power steering lines.
5. Connect the coolant hoses.
6. Connect the fuel lines.
7. Install the spark plugs.
8. Install the intake and exhaust manifolds.
9. Install the air filter assembly.
10. Connect the negative battery terminal.

4. Start the engine

Once the engine is installed, you can start it. To do this, you will need to:

1. Turn the ignition key to the “on” position.
2. Wait for the fuel pump to prime.
3. Start the engine.

If the engine starts, you have successfully installed the new engine. However, it is important to note that you may need to make some adjustments to the engine before it is running properly. For example, you may need to adjust the timing or the idle speed.

Installing an engine in a car is a complex process, but it is one that can be completed successfully with careful planning and execution. By following the steps outlined in this guide, you can ensure that your engine installation is a success.