Contents
  1. Car Mechanic Simulator 2015: Engine Swap Guide
  2. Before You Start
  3. Step-by-Step Guide
  4. 1. Remove the old engine
  5. 2. Prepare the new engine
  6. 3. Install the new engine
  7. 4. Test the new engine
  8. Conclusion
  9. Related Articles

Car Mechanic Simulator 2015: Engine Swap Guide

An engine swap is a major undertaking, but it can be a very rewarding experience. In this guide, we’ll walk you through the steps of how to swap an engine in Car Mechanic Simulator 2015.

Before You Start

Before you start, there are a few things you’ll need to do:

  • Make sure you have the right tools. You’ll need a variety of tools to complete an engine swap, including:
    • A socket set
    • A wrench set
    • A torque wrench
    • A breaker bar
    • A jack and jack stands
  • Find a suitable donor car. The donor car should be the same make and model as your project car, and it should have the same type of engine that you want to install.
  • Remove the engine from the donor car. This is a complex process, and it’s not covered in this guide.

Step-by-Step Guide

Once you have the necessary tools and parts, you can begin the engine swap. Here’s a step-by-step guide:

1. Remove the old engine

To remove the old engine, you’ll need to:

  • Disconnect the battery.
  • Drain the coolant and oil.
  • Remove the exhaust system.
  • Remove the intake system.
  • Unbolt the engine mounts.
  • Lift the engine out of the car.

2. Prepare the new engine

Once you have removed the old engine, you’ll need to prepare the new engine for installation. This includes:

  • Installing the new engine mounts.
  • Installing the new intake system.
  • Installing the new exhaust system.
  • Filling the engine with oil and coolant.

3. Install the new engine

To install the new engine, you’ll need to:

  • Lift the engine into the car.
  • Bolt the engine mounts to the frame.
  • Connect the exhaust system.
  • Connect the intake system.
  • Connect the battery.

4. Test the new engine

Once you have installed the new engine, you’ll need to test it to make sure that it’s working properly. Start the engine and let it idle. Check for any leaks or unusual noises. If everything looks good, you can take the car for a test drive.

Conclusion

An engine swap is a complex and time-consuming process, but it can be a very rewarding experience. By following these steps, you can safely and successfully swap the engine in your Car Mechanic Simulator 2015 project car.