Can You Swap Engines in Car Mechanic Simulator 2018?

Yes, you can swap engines in Car Mechanic Simulator 2018.

How to Swap Engines in Car Mechanic Simulator 2018

To swap engines in Car Mechanic Simulator 2018, you will need the following tools:

* Engine hoist
* Engine stand
* New engine
* Gasket set
* Bolts and nuts
* Wrenches
* Screwdrivers

Once you have all of the necessary tools, you can follow these steps to swap the engine:

1. Raise the car on a lift or jack stands.
2. Remove the hood and disconnect the battery.
3. Drain the coolant and oil from the engine.
4. Remove the intake and exhaust manifolds.
5. Remove the water pump and alternator.
6. Disconnect the power steering and air conditioning lines.
7. Remove the flywheel and clutch.
8. Remove the transmission.
9. Attach the engine hoist to the engine.
10. Lift the engine out of the car.
11. Place the new engine on the engine stand.
12. Install the gasket set on the new engine.
13. Lower the new engine into the car.
14. Install the flywheel and clutch.
15. Install the transmission.
16. Connect the power steering and air conditioning lines.
17. Install the water pump and alternator.
18. Install the intake and exhaust manifolds.
19. Fill the engine with coolant and oil.
20. Connect the battery and start the car.

Tips for Swapping Engines in Car Mechanic Simulator 2018

* Make sure that the new engine is compatible with the car.
* Follow the instructions carefully and take your time.
* If you are not confident in your abilities, do not attempt to swap the engine yourself.
* Get help from a friend or a mechanic if you need it.

Conclusion

Swapping engines in Car Mechanic Simulator 2018 is a complex process, but it is possible with the right tools and knowledge. By following the steps in this guide, you can successfully swap the engine in your car and get back on the road.