Can I Drop an EJ Engine Out of the Car?

Introduction

The EJ engine is a series of boxer engines that were used in a variety of Subaru vehicles from 1989 to 2021. These engines are known for their durability and reliability, and they are often used in performance applications. If you are considering dropping an EJ engine out of your car, there are a few things you need to know.

What is Involved in Dropping an EJ Engine?

Dropping an EJ engine out of a car is a relatively complex process. It requires removing the engine from the engine bay, disconnecting the transmission and other components, and then lifting the engine out of the car. This process can take several hours, and it is best left to experienced mechanics.

Necessary Tools and Equipment

To drop an EJ engine, you will need the following tools and equipment:

Engine hoist
Engine stand
Socket set
Wrench set
Screwdriver set
Pliers
Floor jack
Jack stands

Safety Precautions

Before you begin working on your car, it is important to take the following safety precautions:

Park your car on a level surface and engage the parking brake.
Disconnect the negative terminal of the battery.
Allow the engine to cool down completely.
Wear safety glasses and gloves.

Step-by-Step Instructions

To drop an EJ engine out of a car, follow these step-by-step instructions:

1. Remove the Engine Mount Bolts

Locate the engine mount bolts and remove them using a socket wrench. There are typically two or three bolts on each side of the engine.

2. Disconnect the Transmission

Disconnect the transmission from the engine by unbolting the bell housing bolts. You may need to use a pry bar to separate the transmission from the engine.

3. Disconnect the Other Components

Disconnect all of the other components that are connected to the engine, such as the coolant hoses, fuel lines, and electrical wires. Be sure to label all of the components so that you can reconnect them later.

4. Lift the Engine Out of the Car

Attach the engine hoist to the engine and lift it out of the car. Be careful not to damage the engine or the car.

5. Place the Engine on an Engine Stand

Place the engine on an engine stand and secure it. This will make it easier to work on the engine.

Conclusion

Dropping an EJ engine out of a car is a complex process, but it is possible with the right tools and experience. By following the step-by-step instructions in this article, you can safely and successfully drop an EJ engine out of your car.