Banvie Car Engine Start System Installation Instructions

Introduction

The Banvie Car Engine Start System is a remote start system that allows you to start your car from anywhere within a certain range. This system is perfect for people who want to be able to start their car from the comfort of their home or office, or for people who want to be able to start their car in the winter without having to go outside.

Installation

The Banvie Car Engine Start System is a relatively easy to install. However, it is important to follow the instructions carefully to ensure that the system is installed correctly.

The first step is to disconnect the negative battery terminal. This will help to prevent any electrical shocks.

Next, you need to locate the ignition wires. These wires are usually located under the steering column. Once you have found the ignition wires, you need to cut them and splice the Banvie Car Engine Start System wires into them.

Once the wires are spliced, you need to connect the Banvie Car Engine Start System control module to the wires. The control module is usually located under the dash.

Once the control module is connected, you need to reconnect the negative battery terminal.

The final step is to program the Banvie Car Engine Start System. To do this, you need to follow the instructions in the user manual.

Troubleshooting

If you have any problems installing the Banvie Car Engine Start System, you can refer to the troubleshooting guide in the user manual. The following are some of the most common problems:

* The system does not start the car.
* The system starts the car but then the car stalls.
* The system does not work at all.

If you are having any of these problems, you can try the following:

* Check the wiring connections to make sure that they are secure.
* Check the battery to make sure that it is fully charged.
* Check the fuses to make sure that they are not blown.
* Reset the system by disconnecting the negative battery terminal for 30 seconds and then reconnecting it.

If you are still having problems, you should contact Banvie customer support for assistance.

Conclusion

The Banvie Car Engine Start System is a great way to add convenience and security to your car. The system is easy to install and use, and it can help you save time and money.